HELMET MOUNTED DC BATTERY PACK MOBILE For CONTOURPLUS CONTOUR HD CONTOURROAM2/3
THIS DEAL IS FOR:
1- CONTOUR/RAGECAMS MODIFIED POWER SOURCE PLUG SOLUTION WITH USB QUICK DISCONNECT PLUG ADAPTER, 10AA BATTERY HOLDER, CAR LIGHTER & ZIP TIE ADHESIVE FLAT MOUNT KIT FOR STRAPPING TO A HELMET.
THIS WAS DESIGNED FOR THE MOTORCYCLE RIDERS THAT WANT LONGER TIME BATTERY POWER - RECORDING SOLUTIONS
4 WAYS TO POWER THIS UNIQUE POWER SUPPLY KIT.
1-USE ANY USB JUICE PACK OR 5V DC CAR PLUG
2- USE THE INCLUDED CAR LIGHTER
3-USE THE SUPPLIED PIGTAIL DIRECT WIRE HARNESS TO 5-15VOLTS
4-USE THE INCLUDED 10AA BATTERY HOLDER
WORKS FOR ALL CONTOUR CAMERAS
CONTOUR CAMERA NOT INCLUDED.
4 mini Zip Ties & 4 adhesive Flat Bottom mounts for cable management when running the usb wire from the camera.
Great for securing the power
wire kit to the back of your helmet or to any flat surface & keep it
from loosely hanging out there & potentially snagging a tree limb
as your flying down the trails recklessly!
The all black wire is negative
Positive lead Has The thin white dashes center positive
PLEASE BE SAFE WHEN EXTREME RIDING!
WEARING A VIDEO CAMERA DOES NOT MAKE YOU INVINCIBLE, NO NEED TO BE A HERO, LIVE TO RIDE & FILM AGAIN!
THIS IS SPECIFICALLY DEVELOPED FOR ALL MODELS OF THE CONTOUR & GOPRO CAMERAS ONLY.
GREAT FOR EXTENDING THE POWER & KEEPING THE CAMERA WATER RESISTANT WITH THE INCLUDED REAR DOOR COVER.
Because this solution is a cable rather then a battery, their is no heat
generated by this solution, reducing the chance of over heating of the
camera.
CONTOURHD-VHOLDR CAMERA, & BATTERIES NOT INCLUDED!
BREAKTHROUGH INVENTION, YOU ASKED, WE PRODUCED AS ALWAYS!
CUSTOM FABRICATED POWER SOLUTION TRIED & TESTED 100%
THE
BIGGEST CONCERN FOR OUR CUSTOMERS USING THE CONTOURHD WAS THAT THE
BATTERY LIFE WAS NOT VERY LONG, ESPECIALLY WHEN USED IN COLD WEATHER!
THIS
BATTERY PACK HOLDER WITH 5V CONVERTER RESISTOR COMBO IS AWESOME FOR
EXTENDING YOUR RECORDING TIMES, & POWER LIFE USING THE CONTOURHD
1080P/720P, & VHOLDR.
THIS
SPECIAL DEVICE ALLOWS THE CAMERA TO REMAIN ON WHILE RECORDING FOR OVER
24HRS USING DURACELL BATTERIES EVEN IN THE ICE COLD WEATHER, & IF
YOU HAVE THE INTERNAL BATTERY INSTALLED, THIS 10AA BATTERY HOLDER WITH
5.5MM PLUG WILL ALSO CHARGE THE INTERNAL BATTERY SO IT WILL BE FULLY
READY TO USE IF YOU UNPLUG THE 10AA BATTERY HOLDER FROM CAMERA, &
IF YOUR 10AA BATTERY HOLDER DRAINS DOWN, THE CONTOURHD WILL
AUTOMATICALLY SWITCH OVER TO THE INTERNAL BATTERY WITH NO RECORDING
INTERRUPTION.
YOU CAN USE RECHARGEABLE BATTERIES ALSO, BUT MAKE SURE THAT YOUR
BATTERIES ARE FRESH & FULLY CHARGED, DO NOT USE OLD MIX MATCHED
SEMI DISCHARGED BATTERIES, BECAUSE THEY CAN NOT GIVE THE POWER NEEDED,
& MAY NOT PERFORM FOR VERY LONG.
HAS BEEN TESTED FLAWLESSLY!
YOU CAN REQUEST US TO MAKE THE CABLE LONGER IF NEEDED FOR ANY CUSTOM APPLICATION,
LIGHTWEIGHT RESISTOR & 10AA BATTERY PACK TO
THE CAMERA WHICH CAN BE EASILY STORED IN A INNER POCKET OR, SMALL
CAMERA BAG.
QUICK DISCONNECT 2.1MM DC CABLE FROM THE BATTERY HOLDER
TO SAVE ON BATTERY LIFE WHICH ONLY DRAINS POWER WHEN ITS CONNECTED
INLINE.
NOTE:
we suggest removing the rear cover protector, it easily pulls out from
the camera, but you may want to use a mini screwdriver head to pry the
slots up holding the rubber tabs in so they can slide out from the pegs
inside, because if you just pull off your cover, the little rubber tabs
will split, & your rear cover will still fit back on fine, it just
will not hang off the cam when the rear is opened like it would
normally!
perfectly molded to fit the rear of your contourhd camera secure &
prevent water from entering into the electronics when using the
external battery pack!
the included zip tie will secure the cable when exiting from the rear of the jacket.
Here is what the tabs look like when they are split from pulling off the rear cover.
Really no big deal on performance or functions of the camera.
ZIP TIE THE 10AA BATTERY HOLDER TO SECURE THEM IN THE PACK!
this shows the contourhd vholdr powering from our 10aa battery pack in standby mode( green light on ), & the usb cable plugged into the rear.
BATTERIES NOT INCLUDED
Here is a picture showing the chd/vholdr in record mode (red light) using the battery pack.
Custom
molded waterproof jacket formed perfectly to fit the backside of the
vholdr, which helps keep the rear end of the contourhd safe from water
when using this battery pack device outdoors.
you are still able to access the record switch on - off when using this special jacket.
The custom designed special jacket wraps around the usb cord to prevent water from entering the rear of the camera!!
YOU CAN ALSO PLUG THE USB PLUG TO ANY PORTABLE JUICE PACK.
WE ALSO MAKE A 8D BATTERY HOLDER IF YOU NEED MORE MOBILE POWER.
THE
USB CABLE CAN EASILY BE EXTENDED AS NEEDED BY SPLICING INTO IT THEN
RE-WATER PROOFING IT, OR WE CAN CUSTOM MAKE THE CABLE LONGER FOR YOU.
