This deal is for 1 motion picture quality 6mm lens that works in all modes FOR ALL THE DRIFT MODELS.(LENS APPEARANCE CAN VARY DEPENDING ON STOCK, BUT YOU WILL ALWAYS GET A COMPATIBLE 6MM LENS) see our youtube links:http://www.youtube.com/watch?v=77YADIkrNVI
http://www.youtube.com/watch?v=90QNHW_-e64
6mm in action on a gopro which has the same views as the stealth and hd170
http://www.youtube.com/watch?v=kQIbKNMzGhM
Paintball video using the gopro hero1 with 6mm lens
http://www.youtube.com/watch?v=xURg7fN4LQg
THE OLDER VERSION STEALTH MINI IS THE EASIEST TO CHANGE OUT THE LENS, HOWEVER IF YOU HAVE THE NEWER VERSION OF THE STEAL MINI, YOU WILL HAVE TO TAKE THE CAMERA APART LIKE THE HD170 AND X170 MODELS TO INSTALL THE 6MM OR ANY OF OUR OTHER LENSES, & TO MAKE THE STEAL MINI ABLE TO ACCEPT THE STOCK LENS & CHANGE ON THE FLY WITHOUT DISASSEMBLING THE CAMERA EACH TIME. THE REASON IS THE NEWER LATEST DESIGN ON THE STEAL MINI HAS A TIGHTER FITTING BEZEL RING AROUND THE STOCK LENS & WILL NOT ALLOW IT TO BE REMOVED LIKE THE PAST MODEL WHICH IS THE SAME MODEL ONLY THE MANUFACTURE USED A NEW BEZEL ON THIS LAST BATCH WE RECEIVED IN, SO I THINK THIS IS HOW IT WILL BE FOREVER. BUT OF COURSE WE HAVE A SOLUTION FOR THE CUSTOMERS THAT WANT LENS CHANGE FROM STOCK TO 6MM ON THE FLY. ALL YOU NEED TO DO IS USE A DREMEL TOOL AND SHAVE THE BEZEL RING DOWN ABOUT 1 OR 2MM & THAT WILL DO THE TRICK!
IF YOU HAVE THE OLDER LARGER STEALTH OR THE ORANGE HD/X170 MODELS, YOU NEED TO SEE OUR YOUTUBE VIDEO ON HOW TO CHANGE THE LENS.
6MM is appx 72 degree lens in 1080p & appx 108 degrees in 720p
New technology only offered from ragecams!
NEED ADVICE, PLEASE DO NOT BE AFRAID TO ASK THE PRO'S
You could buy a new camera from us with the lens on it, or we can do the install for you if needed.
To do this lens change/focus on the DRIFT STEALTH MINI is easy, because of the hdmi video out port, & removable lens front bubble.
the lens is not in very tight and its easy to break the seal of it with only minimum heat.
You need to heat up the original lens with a hair dryer for around 7-10 seconds
You will need some real nice needle nose pliers to grip the lens on the side of it, & then over tighten the original drift lens to break the glue seal on it.
After the seal is broke, then twist out the lens counter clockwise till it threads all the way out:
Now VERY CAREFULLY start to thread in the new lens while assuring its going in perfectly straight, do not force it, or cross threading will occur & your shaft will be ruined. Not the end of the world, because we have new shafts if needed.
You can confirm the new lens is going in straight by holding it up vertically to assure its seating correctly.
Tip: You will want to apply a little pressure while installing the new lens & turning it counter clockwise till you feel it seat perfectly in the threads.
When that is confirmed then you can go ahead and start threading it in.
It should thread in pretty smoothly.
If you notice you have to use some force, then its not going in right.
Every install is different depending on the amount of glue the factory used on the original lens.
We may be able to still save your camera if you don't cross thread the new lens in too badly, & will allow you to send us your camera for proper installation, discounted heavily if you bought the lens from us & failed.
HIGHEST QUALITY 6MM GLASS LENS IN THE WORLD SEMI WIDE NO FISH BOWL VIEW!
THIS LENS IS AMAZING QUALITY & FITS THE NEW DRIFT STEALTH MINI
AND WORKS IN ALL MODES WHILE FITTING PERFECTLY BEHIND THE LENS BUBBLE PROTECTOR FRONT CAP KEEPING IT THE CAMERA WATER RESISTANT.
